BULKHEADS, LININGS & DOORS

  MML-USA DOORS & WINDOWS
MML-USA fire rated marine doors are manufactured in our Hood River, OR door factory. Doors can be provided in a variety of fire classes including C class, B15, A15, A60 and H60. All doors have been tested to the IMO FTP 754(18) and can also meet the requirement of 46CFR and NVIC 9-97 construction.

Hardware is provided by major U.S. and European suppliers. This includes card lock and keying systems, padlocks, key cabinets, exit signs, general signage and labeling. A-60 Windows are available up to 1200 x 900mm.

Note: Doors of various US and European configurations, fire ratings, and finishes are a part of our QUICK SHIP PROGRAM. Please phone or fax for details of stock on hand. A-class doors to specification.

Engineering and installation available.
MML-Doors

  MML-USA B-15 Single Latch Fire door (Click for more information.)
Door frame is manufactured from 2mm "ZZ" or "P" frame section. Door blade is manufactured from 0.9mm mild steel filled with mineral wool insulation. Door can be finished in baked finish paint, primer or stainless steel finish. Door is typically supplied with 3 stainless steel lift off hinges, Trioving 5316/8 mortise lock, stainless steel lever handles and back plates.

Options:
  • Frame with overpanel (transom panel)
  • PVC film finish
  • Louver
  • Approved plastic laminate finish
  • Door closer
  • Magnetic holdback
  • Customer specified lockset.
Lloyd's Certificate:MED 0950218
USCG Approval number: 164.136/EC0038/MED 0950218

  MML-USA A0/A15 Single Latch Fire door (Click for more information.)
Door frame is manufactured from 3mm Z section weld in frame. Door blade is manufactured from 0.9mm mild steel filled with mineral wool insulation. Door can be finished in baked finish paint, primer or stainless steel finish. Door is typically supplied with 3 stainless steel lift off hinges, Trioving 5316/8 mortise lock, stainless steel lever handles and back plates.

Options:
  • PVC film finish
  • Approved plastic laminate finish
  • door closer
  • magnetic holdback
  • customer specified lockset.
Lloyd's Certificate: MED 0950299
USCG Approval number: 164.136/EC0038/MED 0950299

  MML-USA A60 Single Latch Fire door (Click for more information.)
Door frame is manufactured from 4mm Z section weld in frame. Door blade is manufactured from 1.5mm mild steel filled with ceramic wool insulation. Door can be finished in baked finish paint, primer or stainless steel finish. Door is typically supplied with 4 heavy duty stainless steel lift off hinges, Trioving 5320/8 mortise lock, stainless steel lever handles and back plates.

Options:
  • Approved plastic laminate finish
  • door closer
  • magnetic holdback
  • customer specified lockset w/ 19mm throw.
Lloyd's Certificate: MED 0950300
USCG Approval number: 164.136/EC0038/MED 0950300

  MML-USA A60 Double Leaf Fire door (Click for more information.)
Door frame is manufactured from 4mm Z section weld in frame. Door blades are manufactured from 1.5mm mild steel filled with ceramic wool insulation. Door can be finished in baked finish paint, primer or stainless steel finish. Door is typically supplied with 4 heavy duty stainless steel lift off hinges per leaf, Trioving 5320/8 mortise lock on live leaf along with stainless steel lever handles and back plates..

Options:
  • Approved plastic laminate finish
  • door closer
  • magnetic holdback
  • customer specified lockset w/ 19mm throw.
Lloyd's Certificate: MED 0950301
USCG Approval number: 164.136/EC0038/MED 0950301

  MML-USA A60 Single Leaf Fire door w/ Window (Click for more information.)
Door frame is manufactured from 4mm Z section weld in frame. Door blade is manufactured from 1.5mm mild steel filled with ceramic wool insulation. Door can be finished in baked finish paint, primer or stainless steel finish. Door is typically supplied with 4 heavy duty stainless steel lift off hinges, Surelock 3 point lock with stainless steel lever or panic bar and handles and back plates. Options:
  • Window
  • door closer
  • magnetic holdback
  • customer specified lockset w/ 19mm throw.
Lloyd's Certificate: MED 0950234
USCG Approval number: 164.136/EC0038/MED 0950301

  MML-USA A60 Window (Click for more information.)
27 mm A60 SOLAS rated glass fixed into box section frame. Frame manufactured from 1.5 mm mild steel formed into two compatible sections, A 76 x 50 x 2 mm base section and a 76 x 38 x 2 mm clamping section. Frame filled with 128 kg density insulation and 770 kg density monolux 800 board fitted around glass and between frames. Glass panel edges covered in fibrefax protection tape Options:
  • Stainless Steel Frame
  • Finish Painted or Prime Frame
  • Stainless Cover Frame
  • Blind fitted over window
Lloyd's Certificate: MED 0650013
USCG Approval number: 164.137/17/0

  MML-USA A30 Window
A30 SOLAS rated glass fixed into box section frame. Frame manufactured from 1.5 mm mild steel formed into two compatible sections, A 76 x 50 x 2 mm base section and a 76 x 38 x 2 mm clamping section. Frame filled with 128 kg density insulation and 770 kg density monolux 800 board fitted around glass and between frames. Glass panel edges covered in fibrefax protection tape. Options:
  • Stainless Steel Frame
  • Finish Painted or Prime Frame
  • Stainless Cover Frame
  • Blind fitted over window
Lloyd's Certificate: MED 0650015

  NORAC DOORS

Click here to view Norac Products.

  PROMARINE PANELS

Promarine panels for bulkhead applications can be installed in any thickness to provide "C-class", non-combustible ship lining panels. Where "B15" walls are required, the panels should be a minimum of 19 mm thick - excluding laminate faces - and should be joined vertically.

Decorative inserts can be used to disguise the exposed steel pro-file and provide an aesthetically pleasing finished installation.

Bulkhead panels of 19 mm, bonded on both sides with approved HPL (high pressure laminate), have a total weight of 11kg /m2 making them much easier to handle and install (compared to all other available solid core wall panels where 17kg/m2 is typical for "B15" usage and + 20 kg/m2 for steel / mineral wool systems.

Maritime Services stocks several hundred Promat Panels as a part of Maritime Service's QUICK SHIP PROGRAM in a variety of USCG & MED approved plastic laminate finishes and as plain boards. Plain boards can be laminated with owner selected finishes and shipped within 2-3 weeks of order (ship time depends on availability of laminates). European and domestic (US) laminates are available to match existing decor.

Click here for a table of all Physical Properties.

  ALUMINUM PRODUCTS

Aluminum sheet goods with decorative surfaces, one or both sides, are available with installation profiles for use where light weight is required. Panels can be provided perforated for use in areas where sound reduction is needed, such as engine rooms. Thickness of aluminum sheet and decorative surfaces can be varied to suit requirements. Thickness ranges from 0.50 to 2.0mm and weight will vary from 0.50lbs/ft2 (laminated) to 1.38 lbs/ft2 (laminated). Sheet size is normally 4' x 8' but is available up to 10' x 5'. Smaller and precut and punched and formed panels are also available.

Aluminum honeycomb and phenolic are very rigid panels with applications where lightweight and a variety of decorative surfaces are desired. Maritime Services can provide aluminum honeycomb and phenolic in a wide variety of thickness and alloys to meet mil spec and non-mil spec applications. Installation profiles are also available.

CONTACT: 541-386-1010 | sales@mscor.com | CORPORATE ADDRESS: 3457 Guignard Drive, Hood River, OR 97031